Specification
|
Picture
|
Comments
|
Extra Strong, Custom Built Bow Roller
|
|
Highly polished stainless steel bow roller designed to nest a Delta 88 and a Bruce 110 without contamination. Fabricated with 2 mil thicker stock than standard roller thickness
(Not Standard)
|
All stanchions, stanchion bases, bolts, pulpit and push pit made of 316 SS
|
|
We also have added a stainless Steel (SS) boarding plate - it can be seen on top to the toe rail between the gates (Not Standard)
|
Push pit modified to accommodate inclusion of hydraulic back stay adjusters
|
|
Although backstay adjusters do not help the shape of a roller furling main, we have sound them of great value in trimming the luff of the Genoa, making the boat go faster and point higher
(Not Standard)
|
Push pit modified to accommodate push pit mounted life raft holder
|
|
(Not Standard)
|
Flag pole integral to Push pit
|
|
(Standard)
|
Additional Flag Pole intergral to Arch
|
|
(Not Standard)
|
Dinghy Lift Built into Arch
|
|
(Not Standard)
|
Pulpit includes
teak seat
|
|
Unvarnished
(Not Standard)
|
Integrated Snubber Line built into the boat
|
|
In addition to the convenience of being built into the baot, the snubber system incorporated into Dakare reduces scope requirements and pitching in seas
(Not Standard)
|
Rub rail extended forward
|
 |
(Not Standard)
|
Stern SS protection extended to cover entire transom edge
|
|
(Not Standard)
(Also shown is one of the stern flush mounted salt water wash down outlets - See Below - Not Standard)
|
SS/Teak extended (large) stern seats both Port and Starboard
(Standard)
|
|
Secured with SS bolting mechanism
|
Antenna Farm on Arch for:
Dedicated WxFax
 Navtex
 Northstar GPS
 RayMarine GPS
 IMARSAT C
 RADAR
 Ocens Sat Pic Sys
 Aft & Frwrd Spot Lights
 Elevated Stern Light
 Wind Fenerator
 Movie Camera Mount
|
(Not Standard)
|
(Not Standard)
|
Dual Open and Closed Chocks
|
|
(Not Standard)
|
Dinghy Engine Lift Buile into Arch
|
|
(Not Standard)
|
Cowl Protectors on all Cowls
|
|
Both Front and Aft
(Not Standard)
|
Custom Bow Roller System to allow nesting of a Bruce 110 and a Delta 88 with no contamination
|
|
Either anchor can be launched and retrieved without touching the other anchor
(Not Standard)
|
Spring loaded covered howser holes for addtional rode anchor lines
|
|
(See lower right)
(Not Standard)
|
Heavy Duty SS Lighthouse Windlass
with polished SS working plates
|
|
Includes dual gypsies and capstans for both rode and chain both port and starboard
(Not Standard)
|
Removeable Side Boarding Ladder
(Standard)
|
 |
Can be used on both Port and Starboard sides
|
Custom Made Cockpit Cushions with Extra Padding, Elbow Guards and Retaining Straps
|
|
(Not Standard)
|
Dodger and Bimini - Although sold as a standard Option on Hylas boats, Dakare's system features extra heavy duty tubing and custom fitted slat tubing (Shown) on the base of the dodger to prevent water from entering the cockpit
|
|
(Not Standard)
|
Custom Fabricated Hatch Dikes (Spash Guards) for forward 2 hatches
|
|
(Not Standard)
|
Custom Fabricated Channel Guards to Prevent Sea Water from entering cockpit
|
|
(Not Standard)
|
Locking Lazarettes
|
|
(Not Standard)
|
225 Watts (3 Panels) of Siemens Solar Panels mounted on SS Frames on top of Bimini
( Click Here for more detail on Electrical Charging)
|
|
 |
Removable Storm Shutters for Main Saloon Windows (forward and side windows)
|
|
 |
 Both Bow and Stern salt and Fresh Water Wash Down Systems
|
|
Shown is one of the flush mount Down Outlets
|
While on the subject of Deck Features, we also upgraded the standard T Track to Ocean Series 3 Track and Cars for both the Genoa and Stays'l Sheets
|
|
For further detail on this and other rigging features, Click Here
(Not Standard)
|
Retractable Glen Denning AC Power Cable Unit for 50Amp 220V Service (80 Feet)
Shown is the ability to hook up European Power to the same connector
|
(Not Standard)
|
The Standard AC Inlet Plus Cable & Phone
|