Hylas 54 Specifications | Home (Back to home page of website www.Dakare.com)
Dive Compressor
Bauer Junior IIE Serial Numbar A/1738/03
Specifications:
Oil capacity 362 Cu Cm ~ 12.17 Oz (32Oz/Qt - 16 Pt) 76% Pint
3200 PSI
Technical Contacts:
Ken Niles - ProductSupport@BauerComp.Com 757 858-5129
Dave Furguson - Service@BauerComp.Com 757 858-6006
Howard Danville Service Technician
Nob Hill Business Plaza
10052 NW 53rd St.
Sunrise FL 33351
954 746-2504
flserv@BauerComp.Com
Maintenance Functions:
 Run once every 3 - 4 weeks
 Change Oil every 50 Hrs or once per year
 Clean sintered metal filter with soapy water once every year
 Change Cartridge in PO Filter system every 36 fills (Temperature Dependent)
 Inspect/Clean and Paint compressor stand as necessary
 Lube all external Parts
Notes on installing Bauer Junior IIe 3rd Stage Valve Head Replacement
 Follow instructions in MNL-0252 manual - they are minimal.
 You must remove the air lines
 Both shrouds must be removed
 The fan shroud will slip off around the Intermediate Separator
 Special Instructions:
 Clean grease off of piston and apply Bauer lube oil to O-Ring
 When valve head is on, tighten down all screws for valve head at 7lbs torque
 Subsequently, put on Discharge Valve (47141) last and snug down. Tighten only till it is snug, does not move, </= 5lbs
 Use socket wrench to remove piston if replacing using light taps
 Replace nylon rings (not identified in manual) when reinstalling piston
3rd Stage Valve Head Parts:
014121 Pressure Valve
N2789 Pressure Valve O-Ring
004555 Valve extraction Tools
075310 Piston.Sleeve Assembly w O-Ring
007790 Intake Valve
Our Guest Book
Select
leaving a message in our Guest Book or view our Guest Book
|
|
|
(Please note that we can only check the guest register when we have access to a land line while in )
|